search
find a service centre
Macnaught Pty Ltd » flow meters » m-series™ positive displacement flow meters » M4
Click to enlarge
Click to enlarge
M4 - 1/2" pulse and LC display meters
The M4 is a low to medium flow range model. It is a compact meter that has the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability and durability.
Features
- Compact size.
- Two independent pulse units.
- Flexibility of installation options (e.g. can be mounted horizontally or vertically; no flow conditioning required).
- Low pressure drop allows for economical pump selection or gravity flow applications.
- Meter construction enables fast and easy on-site servicing without removal from application.
- Meter design minimises the number of wearable and replaceable parts and extends product life.
- Meter accuracy is verified by a factory calibration check after which an individual metrology report is issued.
- All LC Displays meet European CE directive for EMC.
- Display/Pulse Version has IP65/NEMA9 protection.
- Intrinsically safe LC Deluxe & Standard Displays. Certificate of conformity number PTB Nr. Ex-93.C.4033x & KEMA O5ATEX1168X
Specification:
| Model | M4 |
| Meter Type | Pulse / Standard LC Display / Deluxe LC Display/MR100 Display |
| Meter Body Material | Aluminium / 316 Stainless Steel / Bronze |
| Wetted Components: Rotor Material Shafts O'ring |
PPS / 316 Stainless Steel 316 Stainless Steel NBR (Nitrile) |
| Flow Rate Ranges (Litres Per Minute/US Gallons Per Minute) Above 5 cPs Below 5 cPs |
2 To 30 / 0.5 To 8 3 To 25 / 0.8 To 6.60 |
| Accuracy- Within (Of Reading) | +/- 0.5% |
| Repeatability | 0.03% |
| Maximum Viscosity (Of Standard Model) | 1000 Centipoise (Optional Hi Viscosity Rotors) |
| Maximum Operating Pressure | 5500kpa/ 800 Psi/ 55 Bar |
| Pulser Type | Hall Effect or Reed Switch or Combination HE / RS |
| Pulses Per Litre/Us Gallon | 112/424 |
| Max. Operating Temperature | 80°C / 176°F, High Temp Option120°C / 248°F |
| Recommended Mesh Strainer Size | 60 Mesh |
*Note: For doubled pulse output or SAA flame proof certification use M5 series models (contact for more info)
Port Size:
To order flowmeter you must replace ‘X’ with the relevant number. This number will determine the following specifications:
| Port Size: | Calibrated In: | Electrical Connections |
| 1 = ½” BSP (F) ports | Litres | 20mm (F) Conduit Thread |
| 2 = ½” NPT (F) ports | US Gallons | ½” NPT |
PPS = Polyphenylene Sulfide Resins
Special Models
| M4SSPH-X | High Pressure Version |
| Threaded Versions Only | 200 Bar / 2900 PSI Working Pressure |
Available Options: Pulse LC Displays - Hi Viscosity Rotors
Options and accessories
| M4 - ½” PULSE AND LC DISPLAY METERS | M4ARX-X | M4ASX-X | M4SRX-X | M4SSX-X | M4BRX-X |
| FKM O-Ring | Ο | Ο | Ο | Ο | Ο |
| FEP O-Ring | Ο | Ο | Ο | Ο | Ο |
| EPDM O-Ring | Ο | Ο | Ο | Ο | Ο |
| High Temp Rotors | Ο | • | Ο | • | Ο |
| High Viscosity Rotors | Ο | Ο | Ο | Ο | Ο |
| Hall Effect Sensor | Ο | Ο | Ο | Ο | Ο |
| Reed Switch | • | • | • | • | • |
| Solvent Kit | - | - | - | - | - |
| Hastalloy C Shafts | - | - | - | - | - |
| Protective Boot Deluxe LCD | - | + | + | + | Ο |
| Protective Boot Standard Display LCD | - | + | + | + | Ο |
| Remote Mounted LC Display | + | + | + | + | + |
| Heating Jacket | - | - | - | - | - |
| 4-20mA Module (Meter or Remote Mount) | + | + | + | + | + |
• Standard Ο Optional – Not Available + Accessory